Nottinghamshire, East Midlands · Looking for a specific address instead? Search by postcode
Last 30 days
G1 - 3 x Damsons - crown reduce up to 2.5m. T1 - Ornamental Pear - remove 2 of the 3 leaders back into the main crown. T2 - Damson - fell to ground level. T3 - Ash - crown raise from ground level up to 4m. T4 - Yew - fell to ground level. T5 - Purple Plum - fell to ground level.
T1 - Tibetan Cherry - Remove
T1 - Ash, codominent stem - rotten stem - remove the damaged stem leaving the main leader stem. T2 - Sycamore - damaged stem - fell
T1 - Ash - Die back and cup at union fork. Prune selected lateral branches to reduce crown spread to decrease mechanical stress on the weak cup union and on the weaker later branches. This approach aims to prolong the tree's life and retain its landscape value. Some research suggests pruning can have positive effects on ADD affected ash trees. the intention is not to prune evry branch but to select branches to create a new average crown spread. East from 10.5m to 5.5m West from 8m to 4m North from 7.8m to 5m, South 7.8m to 5m.
Undertake work to tree protected by TPO N286 - land ro the rear of "Hartfield", Station Road, Fiskerton and identified as T3: T1 - sycamore - Up to 2metre crown reduction all around to keep away from buildings
T1 - 1x dead Sycamore - fell T2 - 1x dead Sycamore (beside large Oak) - fell T3 - 1x dead Holly (triple stemmed) - fell T4 - 1x Yew - raise low branches to approx. 4 metres from ground level in increase light to boundary hedge and parking area. T5 - 1x Blue Cedar - fell - tree is sparse and crowded, fell to increase daylight to Yew and hedge below. G1 - group of Conifers in rear paddock - lower to similar height of conifers already reduced in hedgerow - see photo. This is to prevent stems failing in high wind.
T1 and T2 Holm Oak - 26/01511/TWCA T3 Sycamore - Remove 4x branches pictured. 3 dead one rubbing on adjacent limbs T4 Leyland Cypress - Fell/Dismantle to ground level and grind out stump 150-200mm below ground level T5 Silver Birch - Fell/Dismantle to ground level and grind out stump 150-200mm below ground level T6 Silver Birch - Fell/Dismantle to ground level and grind out stump 150-200mm below ground level S1 Stump - Fell/Dismantle to ground level and grind out stump 150-200mm below ground level T7 Crack Willow - Remove failed branch T8 Indian Bean - Crown Lift to provide 2 metres clearance from ground level, by removing smaller diameter branches. Tip back from building for 2m clearance and back from adjacent maple to stop intertwining of the two trees.